Phenalkamine
7034
Phenalkamine epoxy hardener
View 7034 Back to catalog
Phenalkamine / EPOXY CURING AGENT
7003 Phenalkamine epoxy hardener
- Viscosity at 25 °C
- 500-1200 mPa·s
- Mixing ratio at EEW 190
- 100:46-60
- Pot life
- 10-20 min
Where to use 7003
A phenalkamine for industrial protective and marine epoxy coatings, as well as floor coatings for damp conditions. It is a candidate for trials where substrate moisture is a concern.
What to check in a trial
Check surface preparation and adhesion on representative concrete or steel under the conditions expected on site.
Typical processing data
| Amine value (mg KOH/g) | 340-380 |
|---|---|
| Viscosity at 25 °C (mPa·s) | 500-1200 |
| Mixing ratio at EEW 190 | 100:46-60 |
| Pot life | 10-20 min |
| Dry to touch | 3-5 h |
| Full cure | 16-24 h |
Curing data are for 25 °C. Request the current technical data sheet and confirm suitability in your formulation.
Contact DAHUA
Ask about 7003
Request a quote, a sample or the latest technical documents.
Phenalkamine
Related grades
Explore other grades in this chemistry family and compare their processing data.