Cycloaliphatic amine
1618S
Modified cycloaliphatic amine epoxy hardener
View 1618S Back to catalog
Cycloaliphatic amine / EPOXY CURING AGENT
2280 Modified cycloaliphatic amine epoxy hardener
- Viscosity at 25 °C
- 280-510 mPa·s
- Mixing ratio at EEW 190
- 100:50
- Pot life
- 40-60 min
Where to use 2280
A modified cycloaliphatic amine for high-solids epoxy coatings, chemical-resistant linings and mortars. Consider it when screening a binder for a lining or a filled mortar.
What to check in a trial
Test the complete system against the intended chemicals, exposure conditions and service temperature.
Typical processing data
| Amine value (mg KOH/g) | 210-280 |
|---|---|
| Viscosity at 25 °C (mPa·s) | 280-510 |
| Mixing ratio at EEW 190 | 100:50 |
| Pot life | 40-60 min |
| Dry to touch | 3-6 h |
| Full cure | 10-16 h |
Curing data are for 25 °C. Request the current technical data sheet and confirm suitability in your formulation.
Contact DAHUA
Ask about 2280
Request a quote, a sample or the latest technical documents.
Cycloaliphatic amine
Related grades
Explore other grades in this chemistry family and compare their processing data.