Polyamide
115S
Polyamide epoxy hardener
View 115S Back to catalog
Polyamide / EPOXY CURING AGENT
125N Polyamide epoxy hardener
- Viscosity at 25 °C
- 6000-12000 mPa·s
- Mixing ratio at EEW 190
- 100:60-70
- Pot life
- 100-150 min
Where to use 125N
A polyamide for protective epoxy coatings on steel, containers and floors, as well as room-temperature structural bonding. Compared with 115S, it offers a lower hardener viscosity range and uses a different mix ratio.
What to check in a trial
Confirm the mix ratio for your resin and compare application viscosity and adhesion on the intended substrate.
Typical processing data
| Amine value (mg KOH/g) | 335-365 |
|---|---|
| Viscosity at 25 °C (mPa·s) | 6000-12000 |
| Mixing ratio at EEW 190 | 100:60-70 |
| Pot life | 100-150 min |
| Dry to touch | 7-13 h |
| Full cure | 10-16 h |
Curing data are for 25 °C. Request the current technical data sheet and confirm suitability in your formulation.
Contact DAHUA
Ask about 125N
Request a quote, a sample or the latest technical documents.
Polyamide
Related grades
Explore other grades in this chemistry family and compare their processing data.